Selecting The Input Signal - Panasonic TH-85VX200W Operating Instructions Manual

Selecting the input signal

INPUT
HDMI1
HDMI2
HDMI3
HDMI4
COMPONENT
PC
When an optional Terminal Board is installed:
INPUT
HDMI1
HDMI2
HDMI3
HDMI4
SLOT INPUT
COMPONENT
PC
Using dedicated buttons for input selection
Notes:
• Selecting is also possible by pressing the INPUT button on the
unit.
• Select to match the signals from the source connected to the
component/RGB input terminals. (see page 41)
• Image retention (image lag) may occur on the plasma display
panel when a still picture is kept on the panel for an extended
period. The function that darkens the screen slightly is activated
to prevent image retention (see page 60), but this function is not
the perfect solution to image retention.
16
Press to select the input signal to be played back from the equipment
which has been connected to the Plasma Display.
HDMI input terminals in HDMI 1 to HDMI 4.
Component or RGB input terminal in COMPONENT/RGB IN.*
PC input terminal in PC IN.
* "COMPONENT" may be displayed as "RGB" depending on the
setting of "Component/RGB-in select". (see page 41)
Input terminal in Terminal Board
When a dual input Terminal Board is installed, "SLOT INPUT A" and "SLOT INPUT B"
are displayed.
Press to select HDMI signal terminals in HDMI 1 to HDMI 4.
Press to select component or RGB signal terminal in COMPONENT/RGB IN.
Press to select PC signal terminal in PC IN.
Press to select Input terminal in Terminal Board.
For dual input Terminal Board, you can select either input terminal
using A or B button.
ENTER/
MENU
INPUT