Panasonic TH-85VX200W Operating Instructions Manual page 35

Cinema reality When "on", the display attempts to reproduce a more natural
interpretation of sources such as movie pictures, which
are recorded at 24 frames per second. If the picture is not
stable, turn the setting to "off".
Note:
When "On", this setting only affects the following signal input:
• 525i (480i), 625i (575i), 1125 (1080) / 60i signal input during "Component" input signal.
Studio Gain Sharpens the contrast for a better view when a part of the
image is too light to see.
Off: Disables "Studio Gain".
On: Enables "Studio Gain".
Notes:
• "Studio Gain" can be modified when "Studio mode" in the Options menu is "On". When "Studio mode" is "Off",
this setting is "Off" and cannot be changed. (see page 53)
• This setting is valid only when the input signals are as follows:
Component Video, RGB (analog), SDI, HDMI
Noise reduction
[Advanced NR]
Sets the three NR functions separately.
Select "Advanced".
1
Noise reduction
P-NR
Block NR
Mosquito NR
Select the item and set.
2
Noise reduction
P-NR
Block NR
Mosquito NR
P-NR:
Block NR:
Mosquito NR: Reduces mosquito noise around subtitles on MPEG videos.
Note:
"Noise reduction" cannot be adjusted while a PC signal is being applied.
Helpful Hint (
Normalise
On the remote control unit, while the "Advanced settings" menu is displayed, if the OK button is pressed during
"Normalise", then all adjustment values are returned to the factory settings.
Sets the following three NR (Noise Reduction) functions together.
P-NR, Block NR, Mosquito NR
Advanced
Off
Off
Off
Advanced
Off
Off
Off
Automatically reduces unwanted picture noise.
Reduces block noise when playing MPEG videos.
Normalization)
Picture Adjustments
Off
Advanced
select
Off
Max
set
2
select
1
Off On
Off On
Min
Max Mid
Min
Mid
31