Precautions); Using Function Button - Panasonic TH-85VX200W Operating Instructions Manual

Options Adjustments
Item
3D Emitter
Function button assign 1
Function button assign 2
3D Safety Precautions
Memory lock

Using FUNCTION button

Pressing the FUNCTION button activates one of the following ¿ ve functions. The settings
of functions are performed with the "Function button assign 1" and "Function button assign
2" on the Options menu. (see above)
The factory preset functions are as described below.
FUNCTION 1 Button: 3D Settings
FUNCTION 2 Button: Signal
3D Settings / Signal
The menu screen is displayed.
(Example: 3D Settings)
3D Settings
Pressing the FUNCTION button clears the menu.
Scrolling bar / Test patterns / Blue only
Con¿ rmation screen (Example: Scrolling bar)
Function 1
Scrolling bar
Activates the "Scrolling bar only" screensaver. After
15 minutes, the display enters standby mode.
To exit this mode, press any button.
Blue only
The screen displays only blue color for image
adjustment.
To exit this mode, press FUNCTION button.
Note:
"PC Power management" and "Auto power off" are deactivated during "Scrolling bar" or "Test patterns" operation.
(see page 43)
54
Set the infrared transmitter for the 3D Eyewear.
INT: Use the infrared transmitter of the unit.
EXT: Use the external 3D IR TRANSMITTER (available separately.)
Set the function to operate when the FUNCTION button 1 to 2 on the remote control is pressed.
3D settings: The "3D Settings" menu is displayed.
Scrolling bar: The screen saver activates, and after 15 minutes, the display power shuts down
(standby).
Test patterns: The test pattern is displayed by switching among seven patterns.
Blue only: The screen displays only blue color for image adjustment.
Signal: The "Signal" menu is displayed.
3D Safety Precautions show/hide is set during power ON.
On: 3D Safety Precaution is shown every time when the power is ON.
Off: 3D Safety Precaution is not shown when the power is ON.
When the setting changes from "On" to "Off", the con¿ rmation screen is displayed as below.
Pressing "YES" switches the setting.
Locks or unlocks saved pro¿ les. Also for setting passwords. (see page 38)
3D Picture Display 3D
3D Picture Format Auto
3D Picture Sequence
Normal
Safety Precautions
Scrolling bar
Yes No
Adjustments
3D Safety Precautions
If Off is selected, the 3D safety precautions
will not be displayed when power is turned on.
Change Setting?
YES NO
Press to select
The operation starts.
"Yes".
Press.
Test patterns
Each time you press
(seven in all).
Color Bars
Black 1% window
To exit this mode, press any button other than
, a different test pattern is displayed
Red Green
Frame
(2 lines × 2 dots) Blue
.