Advertisement
FOOT CONTROL
Note: The setting of the sewing speed control will limit the maximum speed of the machine
when using the foot control.
Attention: Consult a qualified electrician if in doubt as how to connect the machine to
the power source. Unplug the power cord when the machine is not in use.
The appliance must be used with the foot control C-9001 manufactured by CHIEN HUNG
TAIWAN., LTD.
With the sewing machine turned off, insert the foot
control plug and the power supply cord into their
appointed connectors on the sewing machine.
Turn on the sewing machine, and then slowly
depress the foot control to start sewing.
Release the foot control to stop the sewing machine.
By tapping the foot control one time will allow the
needle to go up or down.
8
INSTRUCTIONS
Advertisement
