Setting Keypad Preferences - Kyocera 7135 Reference Manual

d. Repeat steps b–c
I
f you do not use the Ring by Category feature
phone calls.
If you use the Ring by Category feature:
calls that do not fall into the specified categories. For example, if you have selected a ringer
for your business calls and another ringer for your personal calls (based on phone
numbers in your Address Book), the default ringer indicates a call from a number that is
not in either of these categories.
5. If you want to use a special ringer to distinguish between regular calls, and incoming calls that
could be subject to roaming charges, put a check mark in the
6. Tap when you are finished to return to the Applications screen.

Setting Keypad preferences

Here you can set specify the Key Beep length, sound and volume, and the amount of time to keep
the keypad lit after the last keypress.
1. Tap to view the Applications screen.
2. Tap to display the last Phone Preferences screen you used.
3. Tap in the upper-right corner and select
To set keypad preferences
1. To adjust the over-the-air tones the phone makes while you are dialing, tap
in the Key Beep section. Select
In most cases, you won't need to adjust this setting. For some applications (for example,
modems), you may need to set the tone to Long.
2. To adjust the type of sound you hear when you press a key on the keypad, tap
in the Key Beep section. Select
Sound
3. To adjust the volume of the beep you hear when you press a key on the keypad, tap
in the Key Beep section. Select
Volume
Chapter 12 Setting Phone Preferences
for each category you want to set up.
or
Normal Long
Tones
,
Off
: The default ringer is used for all incoming
The default ringer is used for all incoming phone
Roam Ringer
.
Keypad
.
or .
Clicks
, ,
Low Medium Low Medium High
Setting Keypad preferences
check box.
beside
Length
beside
beside
, or .
High
153