Kyocera 7135 Reference Manual page 179

1. Tap Script from the Details screen.
The Log in Script screen is displayed.
2. Tap beside
End
3. Tap the command you want to use from the pick list. If the command requires additional
information, a field appears to the right of it for you to enter the information. The following
commands are available:
Tells your smartphone to wait for specific characters from the TCP/IP server
Wait For
before executing the next command.
Wait For Detects a challenge-response prompt coming from the server and then displays
Prompt
the dynamically generated challenge value. You then enter the challenge value
into your token card, which in turn generates a response value for you to enter
on your smartphone. This command takes two arguments, separated by a
vertical bar (|) on the input line.
Send Transmits specific characters to the TCP/IP server to which you are connecting.
Send CR Transmits a carriage return or LF character to the TCP/IP server to which you
are connecting.
Send User ID Transmits the User ID information entered in the User ID field of the Network
Preferences screen.
Send Transmits the password entered in the Password field of the Network
Password
Preferences screen. If you did not enter a password, this command prompts
you to enter one. The Password command is usually followed by a
Send CR command.
Delay Tells your handheld to wait a specific number of seconds before executing the
next command in the login script.
Get IP Reads an IP address and uses it as the IP address for your smartphone . This
command is used with SLIP connections.
Prompt Opens a dialog box and prompts you to enter text of some kind (for example, a
password or a security code).
End Identifies the last line in the login script.
4. Tap OK twice to return to the Network Preferences screen.
Chapter 13 Setting PDA Preferences
to show the command picklist.
Setting Network preferences
171