Kyocera 7135 Reference Manual page 65

To return to synchronization by the cradle
After you have set the computer to synchronize data using the infrared port, you must change the
computer settings if you want to return to using the cradle for synchronization.
1. If necessary, connect the cradle to a serial (COM) port of your computer and plug the power
cord into an outlet.
2. Click in the Windows system tray to open the menu.
3. From the menu, choose Setup . Then click Local .
4. Select the COM port to which your cradle is connected.
5. Click OK .
You also have to reset your Kyocera 7135 smartphone for synchronizing by using the cradle.
To do this, place your Kyocera 7135 smartphone in the cradle and follow these procedures:
1. Tap to view the applications screen.
2. Tap to select HotSync.
3. If Local is not already selected, tap Local .
4. Tap below the HotSync icon and select
You can leave the computer set to synchronize data using the infrared port and still use the cradle.
This is useful if you synchronize data from the phone to both your desktop computer and a
laptop. When you travel, you don't have to carry a cradle or cable because your phone is set to
synchronize data via the infrared port. When you're in the office, just return the phone to
the cradle.
Chapter 4 Transferring Information
Synchronizing data using the infrared port
.
Cradle/Cable
57