Advertisement
Setting up your phone
Your phone already has a SIM card installed. For
optimal functionality of your new device, please use
the pre-installed SIM card. To insert a microSD card or
replace the SIM card, follow these steps:
Step 1. Remove the back cover.
Using a coin, rotate the back cover screw counter-
clockwise several times to loosen it.
NOTE: The back cover screw is permanently mounted on the
cover and should not be removed.
Insert your fingernail into the notch at the bottom of the
back cover and lift the cover.
UNLOCK
Step 2. Insert a microSD
NOTE: microSD cards are sold separately.
Locate the SIM/microSD card slot inside the battery
compartment and pull the card tray out of the slot.
Notch
card (optional).
TM
SIM/microSD card slot
Put the tray onto a flat surface and place a microSD
card into the tray. Ensure the gold contacts are facing
down as shown.
Insert the tray into the SIM/microSD card slot, being
careful not to let the cards slide out. Then gently push
the tray back into the slot until it fits into place.
Step 3. Insert the battery.
Unlock the battery latch by sliding it in the direction
indicated by the arrow in the picture below.
Unlock
Battery latch
Advertisement
