DRYER USE
Estimated
Time
Remaining
_:)
Extra
High
L
0
High
O Medium
O Low
O Extra
Low
0
Air Only
0
©
©
TEMP
EXTRA CARE
Status
Loud
Soft
off
0
CYCLE END
TONE
Explosion Hazard
Keep flammabme materials
and vapors, such as
gasoline,
away from dryer.
Do not dry anything
that has ever had anything
flammable
on it (even after washing).
Failure to follow
these instructions can result in death,
explosion,
or fire.
Fire Hazard
No washer can completely remove oil.
Do not dry anything
that has ever had any type of oil on
it (including
cooking oils).
Items containing foam, rubber,
or plastic must be dried
on a clothesline or by using an Air Cycle.
Failure to follow these instructions can result in death
or fire.
WARNING: To reduce the risk of fire, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUCTIONS before
operating this appliance.
Follow these basic steps to start your dryer. Please refer to
specific sections of this manual for more detailed information.
1. Clean lint screen before each load. See "Cleaning the Lint
Screen."
2. Place laundry into dryer and shut door.
3. Select either an Automatic or Manual cycle by pressing the
desired cycle button. The preset settings and drying time for
the chosen cycle will be displayed.
To use an Automatic Cycle
•
Select an Automatic
Cycle.
•
Select DRYNESS LEVEL to adjust how dry you want the
load. As the cycle runs, the control senses the dryness of
the load and adjusts the time automatically
for the
selected dryness level.
To make changes during an Automatic Cycle:
•
Adjust Dryness Level.
NOTE: Dryness Level selections can only be made while
using Automatic
Cycles. Selecting More or Less
automatically
adjusts the preset drying time needed.
[,,l,:_¥_g ZS5
O_
0
M°re
I,,ZVI,iIL
--
O
Normal
O
Less
To use a Manual Cycle
Select a Manual Cycle.
Press the plus (+) or minus (-) key until the desired drying
time is displayed. Press plus (+) or minus (-) and the time
will change by 1-minute intervals. Press and hold plus (+)
or minus (-) and the time will change by 5-minute intervals.
NOTE: The plus (+) or minus (-) features can be used only
with Manual Cycles.
•
Press PAUSE/CANCEL once.
16