M Ic Rowave Oven Control; Control Panel; Interactive Touch Display; Clear - KitchenAid KEHU309 Use & Care Manual

MICROWAVE OVEN CONTROL
This manual covers different models. The oven you have purchased may have some or all of the items listed. The locations and
appearances of the items shown here may not match those of your model.
The microwave oven's controls are accessed through its control panel and interactive touch display.
NOTE: Due to the sensitivity of the control panel, we have provided special instructions for cleaning the panel as well as the touch
screen display. See "General Cleaning" section for cleaning instructions.
Control Panel
A
C D
--7 .......
Control Lock
Hold 5 sec [_
Lower Oven
Lower Oven
Add a _i Minute
Upper Oven
A. Control panel
B. Lower oven controls (see separate Use and Care Guide)
C. Number keys
D. Start/control lock (hold 5 seconds)
E. Off
H G F
F. Timer Set/Off
G. Interactive touch display
H. Clear
I. Clock
The control panel houses the control menu and function controls.
The control pads are very sensitive, and require only a light touch
to activate.
For more information about the individual controls, see their
respective sections in this manual.
The display area functions as both a display interactive,
menu-driven touch control. It is designed to be easily navigable,
guiding you through the menus, offering multiple selections,
accepting your input and executing your commands. It also
provides instructions, tips, and graphics.
Display
When power is first supplied to the microwave oven or, when
power has been interrupted for more than 10 seconds, the clock
will be set to 12:00 RM. To set the time, follow the instructions in
the "Clock" section. To bypass setting the clock and begin using
the oven, touch Start, Off or Clear.
On combination oven models, the left display shows the lower
oven and the right display shows the upper microwave oven.
When the oven(s) are in use (active mode), the display shows the
oven temperature, heat source(s) and timer, if set.
The main menu display may display "Fan Cooling" after the end
of a cooking cycle. The oven cavity fan is used to vent humidity
and/or heat from the oven cavity and may continue to run for
5-10 minutes after a cooking cycle has ended. The microwave
may be used as normal during this cooling period. Food can be
removed or placed in the microwave during this time.
After approximately 2 minutes of inactivity, the display will go into
standby (sleep) mode. When the oven is in operation, the display
will remain active.
When the oven(s) are not in use (sleep mode), the display shows
the time of day, if is set to be displayed. On the combination oven
the time of day will appear in the right display. To turn the clock
display on/off, see the "Clock" section.
During programming, the display shows menus and the
appropriate selections for the respective cooking function. To
view the main menu screens, see the "Main Menu" section.
Touch Screen
The LCD touch screen is used to make menu selections, adjust
settings and input commands.
A
C
A. Title/description region
B. Menu and selection/settings input region
C. Command input region
Menu selections and input adjustments are made in the center
portion of the screen, and the command inputs (OK, Adjust
Settings, Browning, Back, Exit, etc.) are made in the bottom
portion of the screen. Screen titles and descriptions are
displayed in the top portion of the screen, which accepts no
input. A light- to medium-pressure touch of the fingertip will
activate the menu selection.