Microwave Oven Control; Display; Standby Mode; Start - KitchenAid KMCS522PPS Series Use & Care Manual

Microwave oven with convection
Table of Contents

Advertisement

Available languages

Available languages

8

MICROWAVE OVEN CONTROL

Display

When power is first supplied to the microwave oven, "12Hr" will
appear in the display. User can press Timer/Clock button or
+/- button to toggle between 12Hr or 24Hr within 10 seconds.
Press Start button to confirm. If the "12:00" appears in the
display at any other time, a power failure has occurred. Reset
the clock if needed. See the "Clock" section.

Standby mode

When no functions are being used, the microwave oven will
switch to Standby mode.
The Start button begins any function. If non-sensor cooking
is interrupted by opening the door, pressing Start button will
resume the cycle.
NOTE: To avoid unintentional operation of the microwave oven,
a cooking function cannot be started if the microwave oven door
has been closed for about 1 minute. The word "door" will appear
in the display until the door is opened and closed.

Quick start/Add 30 seconds

In standby mode, pressing Start automatically starts the
microwave oven at 100% power for 30 seconds and adds
30 seconds of cook time, with each additional touch of the
control. Time may be added to any manual cooking cycle in
30 second increments, at the moment power level, by pressing
Start button during cooking.

Cancel

The Cancel button clears any incorrect command and Cancels
any program during cooking. Press the Cancel button to Cancel
the cycle. It will not erase the time of day.
The microwave oven will also turn off when the door is opened.
Close the door and press Start to resume the cycle. The Cancel
button is also used to lock and unlock the control panel. See the
"Control Lock" section.

To use Non - Sensor Menu

(Popcorn, Potato)
1. Place food on the turntable and close the door.
2. Touch desired menu control. The first programmed amount
will appear in the display. Touch control keypad repeatedly or
touch number keypads to change quantity.
3. Touch Start. When the cycle ends, "End" will appear in the
display and the end-of-cycle tone will sound.
4. Touch Cancel or open the door to clear the display.

Start

Advertisement

Table of Contents
loading

Table of Contents