KitchenAid ARCHITECT SERIES II KGRS308X Use & Care Manual page 3

Architect series ii
Hide thumbs Also See for ARCHITECT SERIES II KGRS308X:
Table of Contents

Advertisement

Available languages

Available languages

Important
Safety
Instructions
Read all instructions
before using this appliance.
This manual contains important safety symbols and
instructions.
Please pay attention to these symbols and
follow all instructions given.
Definitions
This is the safety alert symbol. It is used to alert you
to potential personal injury hazards. Obey all safety
messages that follow this symbol to avoid possible injury
or death.
Do not attempt to install or operate your appliance until
you have read the safety precautions
in this manual.
Safety items throughout this manual are labeled with a
WARNING or CAUTION statement based on the risk
type.
- indicates a potentially hazardous
situation which, if not avoided, may result in death or
serious injury.
- indicates a potentially hazardous
situation which, if not avoided, may result in minor or
moderate injury.
if the information
in this manual
is
not followed
exactly,
a fire or explosion
may result
causing property damage, personal injury or
death.
FOR YOUR
SAFETY:
-- Do not store or use gasoline or other flammable
vapors and liquids
in the vicinity
of this or any
other appliance.
-- WHAT TO DO IF YOU SMELL GAS:
• Do not try to light any appliance.
• Do not touch any electrical
switch;
do not use
any phone in your building.
• immediately call your gas supplier from a
neighbor's
phone. Follow
the gas supplier's
instructions.
• If you cannot
reach your gas supplier, call the
fire department.
--Installation
and service
must be performed
by a
qualified
installer, servicer
or the gas supplier.
Remove all tape and packaging before using the range.
Destroy the carton and plastic bags after unpacking the
range. Never allow children to play with packaging
material.
• Proper Installation--Be
sure your appliance is properly
installed and grounded by a qualified technician in
accordance with the National Fuel Gas Code ANSI
Z223.-latest
edition, or in Canada CAN/CGA B149.1,
and CAN/CGA B149.2, and the National Electrical
Code ANSI/NFPA No.70-1atest edition, or in Canada
CSA Standard C22.1, Canadian Electrical Code, Part 1,
and local code requirements.
Install only per installation
instructions provided in the literature package for this
range. Ask your dealer to recommend a qualified
technician and an authorized repair service. Know how
to disconnect the power to the range at the circuit
breaker or fuse box in case of an emergency.
• User servicing--Do
not repair or replace any part of the
appliance unless specifically recommended
in the
manuals. All other servicing should be done only by a
qualified technician, This may reduce the risk of
personal injury and damage to the range.
• Ask your dealer to recommend a qualified technician
and an authorized repair service. Know how to
disconnect the power to the range at the circuit breaker
or fuse box in case of an emergency.
• All ranges can tip.
• Injury to persons could result.
• Install anti-tip
device packed
with range.
• See Installation
Instructions.
To reduce the risk of tipping, the
range must be secured by properly
installed anti-tip bracket provided
with the range. To check if the
bracket is installed properly, visually
check that rear leveling leg is
inserted into and fully secured by
the anti-tip bracket by removing
lower front panel or storage drawer
from the range.
For models equipped with a warming drawer or lower
oven, grasp the top rear edge of the range and
carefully attempt to tilt it forward. Refer to the
installation instructions for proper anti- tip bracket
installation.
• Never modify
or alter the construction
of a range by
removing
the leveling
legs, panels, wire covers,
anti-tip
brackets/screws,
or any other part of the
range.
• Remove the oven door from any unused range if it is to
be stored or discarded
Save these instructions
for future
reference.

Advertisement

Table of Contents
loading

Table of Contents