Frigidaire DGGF3054KFN Use & Care Manual page 27

Setting a self-clean cycle or a delayed start
self-clean cycle
Examples: To start an immediate self-cleaning cycle
and/or how to add a delay start time of 9:00 o'clock
and shut-off self-clean automatically:
Step Press
1. Be sure the control is set with the correct
time of day, ALL the oven racks are
removed and the oven door is closed.
Go to step 5 if you wish to start the
self-clean immediately.
When the self-clean cycle has completed:
1. The time of day and "Hot" will appear in the display
window (See Fig.3).
2. Once the oven has cooled down for about 1 hour and
"Hot" is no longer displayed the "door OPn"
message should appear (Fig. 4). When this message
turns off the oven door may be opened.
Fig. 3 Fig. 4
5. Press self clean once for a 3-hour
clean time, press self clean twice for
4-hour clean and press 3 times
for a 2-hour self-clean cycle time.
se|f
dean
6. Press start, start
As soon as the controls are set, the motor driven door
lock will begin to close automatically. "door Loc" will
appear in the display (See Fig. 1). DO NOT open the
oven door while "door Loc" is on (allow about 15
seconds for the oven door to lock). Once the door has
locked "CLn" will appear in the display indicating the
oven will begin the self-clean process (Fig. 2).
Fig. 1 Fig. 2
• During the self-clean cycle, DO NOT force the oven
door open. This can damage the automatic door
locking system. Use caution when opening the door
after the self-cleaning cycle is complete. The oven
may still be VERY HOT.
• To avoid possible burns use care when opening the
oven door after the self-cleaning cycle. Stand to
the side of the oven when opening the door to
allow hot air or steam to escape.
If it becomes necessary to stop a self-clean cycle
once it has been activated:
1. Press cancel.
2. If the self-clean cycle has heated the oven to a high
temperature, allow enough time for the oven to cool
and for the "door OPn" message to appear (Fig. 4).
When this message turns off the oven door may be
opened.
3. Restart the self-clean cycle once all conditions have
been corrected.
Whenever the self-clean feature is active you may check
the amount of time remaining in the self-clean cycle by
pressing the serf pad once. The oven door will be
ctean
locked until the range has cooled sufficiently. You will
need to allow about 1 additional hour to the time
displayed before you can open the oven door.
When the oven is cool, wipe away any residue or
powdered ash with a damp cloth or paper towel.