Self-Cleaning Cycle - Kenmore 911.47812200 Use & Care Manual

CAREAND CLEANING
Self-Cleaning Cycle
The Clean Cycle, including cooldown
time, is automatically set for 4 hours,
but you may change this from 3 hours
if oven is lightly soiled, up to 5 hours if
oven is heavily soiled.
1. Press the SELF CLEAN
pad. 4 hours will show in
the display.
(_ 2. If you want to change
the length of clean time,
press the NUMBER
pads.
(_3. Press the START pad.
After the cycle, you may notice some
white ash in the oven. Just wipe it up
with a damp cloth or sponge
If white spots remain, scrub them
with a soap-filled steel-wool pad. Be
sure to rinse thoroughly. These are
usually deposits of salt that cannot
be removed during the cycle.
If your oven is equipped with
porcelain oven racks, it will be
necessary to grease the edges with a
light coating of vegetable oil after the
clean cycle. This will help maintain
the ease of sliding the racks in and
out of the oven,
If for any reason you are not
satisfied with the cleaning results,
just repeat the cycle.
Simply press the CLEAR/OFF
pad. You will need to wait for the
oven temperature to drop below the
lock temperature (approx, 1 hour)
before attempting to open the door.
"LOCKED" will go out in the disp/a_
27
20P312-2 ENv01