Self-Cleaning Cycle; Racks; Broiler Pan And Grid; Oven Racks - Kenmore 911.47692 Use & Care Manual

Self-cleaning double 27" built-in wall oven with upper microwave
Table of Contents

Advertisement

Available languages

Available languages

CARE AND CLEANING
Self-Cleaning Cycle
The door gasket
is designed
to have
a 5"-6"
gap
at the bottom
of the door
This allows for proper
air circulation
Door Panel
Gasket
lm
2_
1
Remove the broiler pan and grid,
utensils,
and any foil that may be in
the oven.
If your oven is equipped
with
nickel
oven racks,
they should
be
removed
If your oven is equipped
with gray porcelain-coated
oven
racks,
they may stay in the oven
during
the self-clean
cycle.
Soil on the front frame and outside
the gasket
of the door liner will need
to be cleaned
by hand
Front Frame
Clean these areas with hot water,
soap-filled
pads, or cleansers
such as
Soft Scrub ® to remove any soil. Rinse well
with clean water and dry
Do not use oven cleaners-no
commercial
oven cleaner or protective
coating of any
kind should be used in or around any part
of the oven
,
5.
Wipe up any heavy spiitovers on the
oven bottom.
Do not clean the door gasket_
The fiberglass
material of the oven
door gasket cannot withstand
abrasion.
It is essential
for the gasket
to remain intact. If you notice it
becoming
worn or frayed, it should be
replaced
Door Liner
It is normal
for your oven door to give
the appearance
of not having
a good
seal against
the oven
This is due to
the gasket.
The location
of the gasket
on the door maintains
a good
seal and
prevents
any heat loss
Utensils
should
never
be left in the oven
during
a clean
cycle.
Nickel
oven racks
may
be cleaned
during
the self-clean
cycle,
but will lose their luster
and become
hard to slide.
If you
choose
to leave them
in during
the cycle,
wiping
them
with
vegetable
oil after the cycle will
help them
slide easier.
Gray
porcelain-coated
oven
racks
may safely
be cleaned
in
the oven
during
a self-clean
cycle.
Wiping
them
down
with
vegetable
oil after the cycle
will
help them
slide
easier.
For the first clean
cycle,
vent the
room with an opened
window
or
hood vent. This will reduce
the
odor
produced
when
heating
new parts.
IIiir
, ,
,,*_
26

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

911.47699

Table of Contents