Self-Cleaning Cycle - Kenmore 911.40494 Use & Care Manual

IL
, ii iiil #
÷
CAREAND CLEANING
Self-Cleaning Cycle
The Clean Cycle, including cooldown
time, is automatically set for 4 hours,
but you may change this from 3 hours
if oven is lightly soiled up to 5 hours if
oven is heavily soiled
1. Press the CLEAN
pad. 4 hours will
show in the display.
_2. Ifyouwantto
change the length of
HOUR MIN clean time, pressthe
_ HOUR/MIN UP and/ or DOWN arrow
pads.
3. Press the START pad.
Simply press the CLEAR/OFF pad.
You will need to wait for the oven
temperature to drop below the lock
temperature (approx. 1 hour) before
attempting to open the door,
After the cycle, you may notice some
white ash in the oven Just wipe it up
with a damp cloth or sponge,
If white spots remain, scrub them
with a soap-filled pad Be sure ta
rinse thoroughly, These are usually
deposits of salt that cannot be
removed during the cycle.
If for any reason you are not
satisfied with the cleaning results,
just repeat the cycle.
1. Press the CLEAN
pad.
@@ 2. Ifyouwanttochange
the length of clean
HOUR MIN time, press the
_(_ HOUR/MIN UP and/
or DOWN arrow
pads
3. Press the DELAY
START TIME pad.
(_(_4. PresstheHOUR/ MIN UP and/or
HOUR MIN DOWN arrow padsto
(_ _ set the time you
prefer the clean
cycle to start.
Press the START
pad.
÷
18