Kenmore 11062182100 Owner's Manual page 17

Changing Vend Price
Follow all instructions carefully.
NOTE: Place all screws and other items removed from coin
slide assembly on a cloth so they will not get lost.
Electrcal Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical
shock.
1. Unplug dryer or disconnect power.
2. Remove slide mechanism from collar assembly.
3. Remove slide return spring.
4. Place coin(s) in coin slot(s) and push forward all
the way.
5. Remove buffer.
6. Set new vend price by adding or removing the
appropriate block-out keys and/or dime inserts
according to Table of Vend Prices.
TABLE OF VEND PRICE
VEND COIN IlI.I_"IS
PRICE lm341Ee?8
o IIIIIII
Io¢ DI IIII
25¢
I1_1111
35¢ DI IIII
5o¢ II_DIII
6o¢ DI Dill
75¢ IIDDDI 1
85¢ DIDDDI
=1.oo I IllllllH I
• 1.1o DIllllllH I
=1.25 IDDDDDI
=1.35 DI Illlllllll
=1.5o IDDDDDD
=18o nlqlqlqlq 00
=1.75 IBBBBBB
=1.85 oOOOOOO
=2.oo I0000000
7. Reassemble buffer.
8. Pull slide back to original position and reassemble
slide return spring.
NOTES:
* Black slots are closed off by block-out key. To remove
block-out keys, pull straight up.
* Be sure block-out keys and/or dime inserts are
seated properly and ratchet dog is in place with its
spring connected. Be sure the proper coin sizing block
is in place.
Part # 20-3007 for up to 7 quarters and 1 dime
Part # 20-3006 for up to 8 quarters and 0 dimes
* Unless otherwise ordered, all coin chutes are supplied
with Part 20-3006 in place.
9. Plug in dryer or reconnect power.
NOTE: Refer to the product information sheet provided
with the coin box for additional information.
17