Cooktop Use; Cooktop Touch Controls; All Off; Locked - Kenmore 665.44042 Use & Care Manual

Fire Hazard
Turn off all controls when done cooking.
Failure to do so can result in death or fire.
COOKTOP USE
Use the following chart as a guide when setting heat levels.
SETTING RECOMMENDED USE
HIGH • Start food cooking.
• Bring liquid to a boil.
Medium High • Hold a rapid boil.
10-6 • Quickly brown or sear food.
MED • Maintain a slow boil.
Medium • Fry or saute foods.
6-4
• Cook soups, sauces and
gravies.
Medium Low • Stew or steam food.
4-2 • Simmer.
SIMMER • Provide lowest simmer/heat
setting.
DUAL COOKING • Home canning.
ZONE(S) • Large-diameter cookware.
• Large quantities of food.
MELT FUNCTION • Melt chocolate or butter.
WARM FUNCTION • Keep cooked foods warm.
The cooktop touch controls offer a variety of heat settings for
optimal cooking results. For normal surface cooking element
operation, the cooktop touch controls can be set anywhere
between SIMMER and HIGH.
When melting foods such as chocolate or butter, or when
proofing bread, the right front and left front surface cooking areas
can be set to MELT for minimal element operation.
For maximum element operation, all cooktop touch controls can
be set to HIGH when bringing liquids to a fast and rapid boil.
Touch the "down" arrow to immediately reach the HIGH setting.
To Use:
1. Touch ON/OFR
2. Touch the "up" or "down" arrow to increase or decrease
power.
3. To choose a power level between HIGH and SIMMER, touch
and hold either arrow until the desired level has been
reached.
4. When finished cooking, touch ON/OFF to turn surface
cooking area(s) off individually, or touch ALL OFF to turn all
elements off at the same time.
I REMEMBER: When cooktop is in use, the entire I
I
cooktop area may become hot.
I
Hot Surface Indicator Lights
The Hot Surface Indicator Lights are located next to each of the
cooktop touch controls. See "Parts and Features" section. The
Hot Surface Indicator Lights will glow as long as any surface
cooking area is too hot to touch, even after the surface cooking
area(s) is turned off.
If the cooktop is on when a power failure occurs, and if the power
failure is less than 1 hour, the Hot Surface Indicator Lights will
remain on after power is restored to the cooktop. They will remain
on until the cooktop has cooled completely.
The ALL OFF cooktop touch controls turn off all surface cooking
areas that are in use at the same time.
The LOCKED cooktop touch control prevents unintended use of
the surface cooking areas. When the cooktop is locked out, the
surface cooking areas cannot be turned on by the cooktop touch
controls.
To Lock Cooktop: Press and hold the LOCKED keypad for
5 seconds. After 5 seconds, a light will glow red above the "ALL
OFF LOCKED" indicator, indicating that the cooktop touch
controls are in the lockout position.
To Unlock Cooktop: Press and hold the LOCKED keypad for
5 seconds.