Table of Contents
Advertisement
Cup
Folddown the extrashelf on the left or right side of the top rack
to hold additionalcups, stemwareor long itemssuch as utensils
and spatulas,
Adjustable
2-position
top rack
You can raise or lower the top rack to fit tall items in either the top
or bottom rack. Raise the top rack to accomedate items up to
9 in (23 cm) in the top rack and 13 in (33 cm) in the bottom rack,
or lower the top rack to accomedate items up to 11 in (28 cm) in
both the top and bottom racks• Adjusters are located on each
side of the top rack.
Flexible tines
The row of tines on the left and rightsidesof the top rack can be
adjustedto make room for a varietyof dishes.
To adjust the Flexible tines
1. Grasp the tip of the tine that is in the tine holder.
2. Gently push the tine out of the holder.
3.
Lay the tines down, toward the center of the rack.
No-flip clips
The no-flip clips hold lightweight
p_estic items like cups, lids, or
bowls in place during washing.
To raise the top rack
Lift the rack on either, or both, sides until the rack is level.
NOTE: The top rack adjusters MUST be level.
To lower the top rack
Press both rack adjusters and slide the rack back to its
original position•
Loading the Bottom Rack
The bottom rack is designed for plates, pans, casseroles, and
utensils. Many items, up to 13 in (33 cm), tall fit in the bottom
rack. (See recommended loading patterns shown.)
NOTE: The features on your dishwasher rack may vary from the
drawings shown.
To move a clip
1. Pull the clip up and off the tine.
2. Reposition the clip on another tine.
10 place setting
•
Do not load glasses, cups, or plas(!_ items in the bottom
rack. Load small items in the bottom rack only if they are
secured in place.
•
Load plates, soup bowls, etc., between tines•
Ovedap the edges of plates for large loads.
9
Advertisement
Table of Contents
