Automatic Cooking; Cooking Codes; Auto Roast; To Set Auto Roast - Kenmore 911.49479790 Owner's Manual

OPERATION
A guide behind the oven door lists
cooking codes for frequently pre-
pared fresh or uncooked foods
MicrowaveAuto Cooking
Use AUTO COOK to eliminate your
need to look up cooking time in your
cookbook or guess how long to set
cooking time. By sensing the steam
that escapes as food microwaves, the
control adjusts the oven's cooking
time to various types and amounts of
food,
This feature is best used with foods
that you want to steam or retain mois-
ture.
NOTE: Use of the metal shelf with Au-
tomatic Cooking is not recommended.
FOODS NOT RECOMMENDED
for Auto Cooking--F0ods that
must be cooked uncovered, foods re-
quiring constant attention, foods re-
quiring additional ingredients during
cooking, foods calling for a dry or
crisp appearance, foods cooked us-
ing the probe should not be Auto
Cooked.
Automatic Cooking Codes 1-9 are de-
signed to give you easy automatic re-
sults with a number of foods.
CODE 1--Used for reheating foods
quickly and turns off the oven auto-
matically as soon as the sensor de-
tects steam from foods.
CODE 2-9--When used, the oven
will determine how much additional
cooking time is needed after steam
has been detected .The oven will auto-
matically switch to TIME COOK,
When the oven signals, foods are
ready to be stirred, turned or rotated.
AUTO ROAST uses the temperature
probe to cook to the desired serving
temperature Auto Roast uses up to 3
power settings which automatically
switch during roasting, providing ten-
der, even cooking results without
overcooking
Just as in conventional roasting, only
tender cuts of meats should be Auto
Roasted until specified internal tem-
peratures are reached, Less tender
cuts of meat should be microwaved
by time, according to your recipe.
1, Press AUTO ROAST, "AUTO"
and "TEMP" appear on display
and "ENTER CODE" flashes.
2. Press number pad to set Auto
Roast Codex See Auto Roast
Guide.
3. Press START_ Display shows
"COOL" and "CODE" until Food
temperature reaches 80°F. At 80°F,
display switches to show meat's in-
ternal temperature
4. When you select Auto Roast Codes
1,2, 3, or 4, the oven signals with 4
beeps and "TURN" flashes on the
display when it's time to turn the
roast over After you turn the roast,
close the door and press START
again. (NOTE: Oven centin.
ues to cook after the signal
whether or not roast is
turned over.)
After a pre-programmed food tem-
perature is reached, oven signals with
4 beeps and "END" appears on dis-
play.
13