Changing A Cycle Or Setting; Adding Items During A Cycle; Option Selections - IKEA IUD8000WQ0 Use & Care Manual

Table of Contents

Advertisement

Available languages

Available languages

During the first fill of a cycle
1. Press a new cycle and/or options.
2. Check the detergent dispensers. They must be filled properly
for the new cycle.
3. Press START/RESUME.
After the first fill of a cycle
1. Press CANCEL/DRAIN.
Your dishwasher starts a 2-minute
drain, if needed, and clears all indicators.
Let the dishwasher
drain completely.
NOTE: If your dishwasher does not need draining, the
dishwasher stops and clears all indicators.
2. Check the detergent dispensers. They must be filled properly
for the new cycle.
3. Press a new cycle and/or options.
4. Press START/RESUME. (The door must be closed.)
¢ v sJ ng t®ms ©u nc
®
You can add an item anytime before the main wash starts. Open
the door and check the detergent dispenser. If the cover is still
closed, you can add items.
To add items
1. Lift up the door latch to stop the cycle. Wait for the spraying
action to stop before opening the door.
2. Open the door. If the detergent dispenser cover is still closed,
add the item.
3. Close the door firmly until it latches.
4. Press START/RESUME. The dishwasher resumes the cycle
after a 5-second pause.
You can customize your cycles by pressing an option. If you
change your mind, press the option again to turn off the option,
or select a different option if desired.
You can change an option anytime before the selected option
begins. For example, you can turn off the drying option anytime
before drying begins.
After a wash cycle, the dishwasher remembers the options used.
It uses the same options in the next wash cycle, if you press only
START/RESUME.
Hi-Temp Wash
Select this option to increase the target water temperature during
the wash portions of the cycle. Hi-Temp Wash raises the target
water temperature to 145°F (63°C) in the main wash. Heating the
water helps improve washing results. Hi-Temp Wash is useful
when loads contain baked-on food.
This option adds heat, wash time and water to the cycle.
NOTE: Hi-Temp Wash is an option with Pots & Pans and Normal
cycles. Selecting Hi-Temp Wash with Sanitize Rinse has no
effect, as it already raises the main wash to 145°F (63°C).
Sanitize
Rinse
Select this option to raise the water temperature
in the final rinse
to approximately
155°F (68°C). Sanitize Rinse adds heat and time
to the cycle. The Main Wash heating time will be extended to
reach 145°F (63°C). In the Pots & Pans and Normal cycles, this
high-temperature
rinse sanitizes your dishes and glassware in
accordance
with NSF/ANSI Standard 184 for Residential
Dishwashers. Certified residential dishwashers
are not intended
for licensed food establishments.
NOTE: Use Sanitize Rinse with Pots & Pans and Normal cycles.
Only these sanitization cycles have been designed to meet the
NSF/ANSI requirements.
Heated Dry
Select this option to dry dishes with heat.
Switching off Heated Dry skips the dry period. This is useful when
loads contain plastic dinnerware that may be sensitive to high
temperatures.
The dishes take longer to dry and some spotting
may occur. Some items (such as plastics) may need towel drying.
For best drying, use a liquid rinse aid.
NOTE: Heated Dry is an option with all cycles, except the Short
Wash and Rinse Only cycles. Heated Dry begins automatically
with all cycles unless you switch it off.
Lock
Use the lock to avoid unintended
use of the dishwasher. You can
also use the lock feature to avoid unintended
cycle or option
changes during a cycle.
o
0
CONTROL
LOCK
PRESS
& HOLD
When the lock is lit, all buttons are disabled.
NOTES:
The dishwasher door can be opened while the controls are
locked.
You can turn on the lock while the dishwasher
is running. If
you open the door, unlock the controls and press START/
RESUME to restart. You can lock controls again, if desired.
To turn on the lock
Press and hold HEATED DRY for 4 seconds. The lock glows.
If you press any pad while your dishwasher
is locked, the light
flashes 3 times and the selection is ignored.
To turn off the lock
Press and hold HEATED DRY for 4 seconds. The light turns off.
12

Advertisement

Table of Contents
loading

This manual is also suitable for:

Iud8000ws0

Table of Contents