Advertisement
=
5_
With the help of a second person, carefully lower the Left
and Right Uprights (1,44) until the handrails are resting
on the floor.
Attach six Base Pads (57) to the bottom of the Base (59)
in the indicated locations. Note: An extra Base Pad may
be included.
(See drawing 4 above.) With the help of a second per-
son, raise the Left and Right Uprights (1,44) until the
Base (59) is resting flat on the floor.
Before moving the treadmill, see HOW TO MOVE THE
TREADMILL
on page 11.
4
23
6. Align the holes in the Book Rack (62) with those in the
Console (9). Attach the Book Rack to the Console with
the four remaining Screws (75) as shown.
6
62
7. Remove the backing from the Adhesive Clip (77). Press
the Adhesive Clip onto the Rear Roller Endcap (78) in the
indicated location. Press the Allen Wrench (76) into the
Adhesive Clip.
Make sure that all parts are tightened before you use the
treadmill. Notre To protect the floor or carpet, place a
mat under the treadmill. For information on ordering a
mat, see REPLACEMENT
PARTS on the back cover.
7
78
76
6
Advertisement
