Exercise Monitor Modes; Exercise Monitor Operation; Turning Off The Power; Speed - LIFESTYLER C760 Owner's Manual

EXERCISE MONITOR MODES
The exercise monitor features five different modes:
SPEED--Displays your pedaling speed, in miles per
hour.
TIME--Displays the elapsed time. Note: Time will be
counted only while you are pedaling. If you stop for ten
seconds or longer, the TIME mode will hold until you
resume pedaling.
DISTANCE--Oisplays the total distance you have
pedaled, in miles.
CALORIE--Displays the total number of Calodes you
have burned. Note: If the.pedaling resistance is near
the lowest or highest setting, the actual number of
Calodes you have burned will be slightly lower or
higher than the number displayed.
SCAN--Displays the SPEED, TIME, DISTANCE and
CALORIE modes, for five seconds each, in a repeating
cycle.
EXERCISE MONITOR OPERATION
When the power is turned on, the SCAN mode will be
selected automatically. One mode indicator will appear
by the word "SCAN." The SPEED, TIME, DISTANCE
and CALORIE modes_will be displayed in a repeating
cycle. A second mode indicator will show which mode
is currently displayed.
If desired, the SPEED, TIME, DISTANCE or CALORIE
mode can be selected for continuous display by
repeatedly pressing the display mode button. The
modes will be selected in the following order:.SPEED,
TIME, DISTANCE, CALORIE, SCAN.
To reset the LCD display, turn the power off and then
on again by pressing the power button twice.
TURNING OFF THE POWER
When you are finished exercising, press the power
button to turn off the power• Note: If the pedals are not
moved and the controls are not used for four minutes,
the power will turn off automatically.
10