Assembly - LIFESTYLER C760 Owner's Manual

ASSEMBLY
Place all parts of the exercise bike in a cleared area
and remove the packing matedals. Do not dispose of
the packing materials until assembly is completed
Read all steps and examine all drawings carefully.
Use the drawings below to identify the small parts
used in assembly. The number in parenthesis
beneath each part refers to the key number of the
part. The second number refers to the quantity used
in assembly. Note: Some small parts may have
been pre-attached for shipping purposes. If a
part is not found in the parts bag, check to see if it
has been pre-attached:
In addition to the tools Included, the following
tools are required for assembly:
one (1) hammer
one (1) adjustable wrench
one (1) phillips screwdriver
5/8" Plastic Cap (3)-2
Pedal Cap (50)-2
©8
5/16" Pedal Nut (49)-2
@8
1/4" Seat Nut (7)--4
©8
5/16" x 16 Nylon kocknut (17)-2
@@
1/2" Nylon Locknut (46)-2
5/8" Handlebar Spacer (75)-2
Pedal Bushing (55)-2
Link Arm Bushing (58)-2
9/16" Pedal Spacer (73)-2
11/16" Washer (54)-2
O
11/16" Spring Washer (51)-2
9/16" Washer (56)-2
5/8" Spacer (57)-2
Pedal Spring (52)-2
3/4" Phillips Screw (4)-4
5/16" x 1/2" Screw (33)-2
5/16" Washer (65)-2
5116" x 1 !/4" Bolt (14)-2
5/16" x 1 3/4" Bolt (36)-2