LIFESTYLER System CXT Owner's Manual page 15

37. Route the 258" Cable (53) around a Small
Pulley (1). Attach the Small Pulley to the
Butterfly Frame (24) with a 3/8" x 1 3/4" Bolt
(8) and 3/8" Nylock Nut (4). Make sure that
the Bolt is through the indicated hole.
38. Slide a Cable Trap (3) and a Small Pulley (1)
onto a 3/8" x 2" Bolt (9). Route the 258" Cable
(53) around the Small Pulley. Make sure that
the Cable is between the Cable Trap and the
Small Pulley.
Insert the 3/8" x 2" Bolt (9) through the indi-
cated bracket on the Right Butterfly Arm (26).
Tighten a 3/8" Nylock Nut (4) onto the Bolt.
39. Slide a Cable Trap (3) and a Small Pulley (1)
onto _ _/R" x 2" Bolt (.q). Route the 258" Cable
(53) down around the Small Pulley. Make
sure that the Cable is between the Cable
Trap and the Small Pulley.
Insert the 3/8" x 2" Bolt (9) through the indi-
cated bracket on the Butterfly Frame (24).
Tighten a 3/8" Nylock Nut (4) onto the Bolt.
40. Insert a 3/8" x 4" Bolt (12) through the indi-
cated hole in the Butterfly Frame (24).
Slide a Small Pulley (1) and a Cable Trap (3)
onto the 3/8" x 4" Bolt (12). Route the 258"
Cable (53) down around the Small Pulley.
Make sure that the Cable is between the
Cable Trap and the Small Pulley. Tighten a
3/8" Nylock Nut (4) onto the Bolt.
53
8
3
24
Ilflll II
/
/
/
15