12
26. Route the 258" Cable
(53) under a Small
Pulley (1). Attach the Small Pulley to the
lower end of the Weight
Upright
(31) with a
3/8" x 3 1/2" Bolt (11) and3/8"
Nylock Nut (4).
Make sure that the Cable Is between
the
Indicated
pin and the Small Pulley.
27. Insert the 258" Cable
(53) through the "1"
Plates (43) as shown.
Route the 258" Cable (53) under a Small
Pulley (1). Attach
the Small Pulley to the indi-
cated bracket
on the Base (19) with a 3/8" x
1 3/4" Bolt (8) and 3/8" Nylock
Nut (4).
28. Route the 258" Cable
(53) through
the indi-
r.ntnd hrnr.k_.t nn the. Rn.qA (19). Attach a
Small Pulley (1) to the bracket with a 3/8" x
1 3/4" Bolt (8) and 3/8" Nylock Nut (4).
29. Attach the Small Backrest
(38) to the Weight
Upright (31) with two 1/4" x 2 1/2" Bolts (7).
26
28
29
19
II IIIrlll