Lubrication - Husqvarna RZ4219 Operator's Manual

LUBRICATION
12/12 1/52 1/365
12/12 Every year
1/52 Every Week
1/365 Every day
Lubricate with grease gun
Oil change T"
Filter change
Lubricate with oil can _
Level check
General
Remove the ignition key to prevent unintentional
movements during lubrication.
When lubricating with an oil can, it must be filled with
engine oil.
When lubricating with grease, unless otherwise stated,
use a high grade molybdenum disulphide grease.
For daily use, the machine should be lubricated twice
weekly.
Wipe away excess grease after lubrication.
It is important to avoid getting lubricant on the belts
or the drive surfaces on the belt pulleys. Should this
happen, attempt to clean them with spirits. If the belt
continues to slip after cleaning, it must be replaced.
Gasoline or other petroleum products must not be
used to clean belts.
Husqvarna-51