OPERATION
Before
Starting
•
Read the sections Safety Instructions and Controls
before starting the machine.
•
Perform the daily maintenance before starting
(see Maintenance Schedule in the Maintenance
section).
•
Check that there is sufficient fuel in the fuel tank.
•
Adjust the seat to the desired position.
The following conditions must be fulfilled before the
engine can be started:
•
The blade switch for engaging the mower blades
must be depressed.
•
The parking brake must be on.
•
Both steering controls must be in the locked
(outer) neutral position,
Starting
the Engine
•
Sit on the seat.
•
Raise the mower deck by pushing the release
button on the top of the lifting lever, Pull the lifting
lever backward to the locked (transport) position.
•
Activate the parking brake by pushing the release
button in and pulling the lever fully upwards.
Mower deck tiffing lever
8058-019
Pull parking brake upwards to activate.
8058-020
Disengage the mower blades by pressing the blade
switch downwards,
Blade switch
8052-001
Husqvarna-25