Husqvarna RZ4219 Operator's Manual page 42

MAINTENANCE
,
,
Carefully lift out the precleaner from the fan
housing. Clean the fan housing so debris
does not fall into the carburetor.
Install a new precleaner and the new
or cleaned air filter element into the fan
housing,
IMPORTANT INFORMATION
Operating the engine with loose or damaged
air cleaner components could allow unfiltered
air into the engine causing premature wear
and failure.
Remove precleaner
8009-408
6. Align the tabs on the cover with the slots in
the housing and replace air filter cover.
Align the tabs
8009-407
,
Pull the handle outwards. Secure the handle
in the air filter cover and press inwards to
close,
o
o o
Close the cover
8009-410
42-Husqvarna