Stopping The Engine - Husqvarna RZ4219 Operator's Manual

OPERATION
Stopping the Engine
Allow the engine to idle a minute in order to attain
normal operating temperature before stopping it, if
it has been worked hard. Avoid idling the engine for
longer periods, as there is a risk of the spark plugs
fouling.
• Disengage the mower deck by depressing the
blade switch.
8052-001
Disengage the mower deck and move throttle to minimum
• Raise the mower deck by pressing the release
button on the lever and pulling fully backward to
the transport position.
• When the machine is standing still, activate the
parking brake by pushing the lever release button
and pulling the lever upward.
• Move the throttle to the minimum position (tortoise
symbol). Turn the ignition key to the stop position.
Mower deck tiffing lever
8058-019
• Move the steering controls outward.
• Remove key. Always remove key when leaving the
mower to prevent unauthorized use.
IMPORTANT INFORMATION
Leaving the ignition switch in any other
position than "OFF" will cause the battery to
be discharged.
P/ace controls in neutral position to stop
8061-020
32-Husqvarna