Jumper Cables - Husqvarna RZ4219 Operator's Manual

OPERATION
Weak Battery
_IL ARNING!
Lead-acid batteries generate
explosive gases. Keep sparks, flame
[_] nd smoking materials away from
batteries. Always wear eye protection
when around batteries.
IMPORTANT INFORMATION
Your mower is equipped with a 12-volt
negative grounded system. The other vehicle
must also be a 12-volt negative grounded
system. Do not use your mower to start other
vehicles.
If "jumper cables" are used for emergency starting,
follow this procedure:
Jumper Cables
• Connect each end of the RED cable to the
POSITIVE (+) terminal on each battery, taking care
not to short against chassis.
• Connect one end of the BLACK cable to the
NEGATIVE (-) terminal of the fully charged battery.
• Connect the other end of the BLACK cable to a
good CHASSIS GROUND on the mower with the
discharged battery, away from the fuel tank and
battery.
To remove cables, reverse order
• Remove BLACK cable first from chassis and then
from the fully charged battery.
• Remove RED cable last from both batteries.
m
Jumpercable connecdon
8011-642
28-Husqvarna