Ignition Switch; Choke Control; Fuses - Husqvarna RZ4219 Operator's Manual

CONTROLS
ignition Switch
The ignition key is placed on the control panel and is
used to start and stop the engine,
CHOKE
UP
BLADES ON
DOWN
BLADES OFF
Ignition switch
8052-001
Choke Control
The choke control is used for cold starts in order to
provide the engine with a richer fuel mixture.
For cold starts the control should be pulled out.
Choke control
8052-001
Fuses
Fuses are located on the left hand side of the machine.
They are accessed by tilting the seat forward. They are
flat pin fuses of the same type used in automobiles,
There are two fuses with ratings and functions:
20 Amp Primary fuse
7.5 Amp Mower deck coupling
20-Husqvarna
Fuses
8011-420