Hour Meter; Tracking Knob - Husqvarna RZ4219 Operator's Manual

CONTROLS
Seat Adjustment Lever
The seat can be adjusted lengthways. When making
adjustments, the lever under the right side of the
seat is pulled up, after which the seat can be moved
backward or forward.
Lengthways adjustment
8058-023
Hour Meter
The hour meter displays the total operating time.
It will flash CHG OIL (Change Oil) at 50 hour intervals,
The flash duration is one hour before and one hour
after the interval, The CHG OIL icon will come on
and shut off automatically, The hour meter cannot be
manually reset,
O
uP
BLADES ON
DOWN
BLADES OF
Hour meter
8052-001
Tracking Knob
If the mower is not tracking straight, check the air
pressure in both rear tires. Recommended air pressure
is 15 psi (103 kPa / 1 bar) for all tires. Tracking must
be checked on a flat and level concrete or blacktop
surface.
Rotating the tracking knob allows fine tuning
adjustments so the machine tracks straight with the
steering control levers in the full forward position,
Rotate the knob clockwise (as viewed from the
operation position) to increase the speed on the left
lever, Rotate counterclockwise to decrease speed,
Tracking knob
8058-020
Husqvama-23