Advertisement
C, Attach outer bag
to cleaner
The outer bag is connected
at the
rear of the cleaner
by hooking
the
two projections
at the bottom
of
the outer bag assembly
into the
grooved
plate extending
from
back of cleaner
base.
BAG
CLIP
Then pull the bag clip (located
just above the cleaner opening)
to the left and fit bag against
opening. Slide the bag clip to the
right to fit completely over the
bag lock.
\
Attach
the bag to the spring
hook, located
on the top section
of the handle.
D. Attach throw away
bag to cleaner
Use HOOVER
bag type C with
this cleaner.
Unzip the outer jack-
et and pull out tube. Roll rubber
bag retainer
down the tube toward
the cleaner.
Slip the open end of the throw
away bag onto tube and push as
far on as possible. (Be sure to
match arrow on throw away bag
with the 0 mark on the tube.)
Advertisement
