Advertisement
Insert the tool so that the button
on the tool fits into the slot in the
end of the hose grip.
Turn the plastic
ring as shown
to
lock the tool in place. To remove
tools,
reverse
the procedure.
For additional
length,
attach
one
or both" wands
to the hose as
described
above.
Tools attach to the wand(s)* in
the same manner.
*Available
with deluxe
set only.
LOCK
D. Use correct
handle
position
and carpet
height
adjustment
Place the cleaner
handle
in the upright
position
for the most convenient
and effective
use of cleaning
tools.
Some cleaners are equipped with a two-speed motor. One speed is utiliz-
ed when the cleaner is being used on carpet and rugs, and a second
higher speed is used with attachments.
When
the handle
is placed
in the upright
storage
position,
the motor I
automatically
adjusts
to the higher speed.
Therefore,
use the cleaner
with the handle in the upright
position
to engage
second
speed.
The adjustment for carpet pile height should be set according to the sur-
face on which the cleaner is standing. This will give added stability when
using the attachments.
Set the adjustment for pile height to LOW if us-
ing the cleaning tools in an area where there are bare floors and use
SHAG in carpeted areas.
To clean attachments
To clean the hose wipe off dirt with a cloth dampened
with a liquid deter-
gent. Rinse with a damp
cloth. Cleaning
tools may be washed
in warm
water
with a detergent.
Rinse and let dry before
using.
13
Advertisement
