Advertisement
How
to replace
the
belt
Disconnect cleaner from electri-
cal outlet.
1. Turn cleaner
over. Remove
bottom
plate
by pushing
latches
toward
outside
of cleaner.
2. Release worn belt from pulley.
3. Lift out rug agitator,
remove
old belt and place new belt in
groove
of rug agitator.
4. Replace agitator by aligning
the projection,
located on one
end of the agitator, with the slot
on the wall of the cleaner base.
Then push the agitator down into
position.
16
Advertisement
