Hoover Convertible U4345 Owner's Manual page 18

5. Place belt on pulley. Side of
belt nearer cleaner should be in
line with projections on bottom
of cleaner.
6. Replace bottom plate. Place
metal knobs on front end of plate
in wire holders. Check to see that
latches are pushed back and will
not be covered by plate. Place
plate in position and latch secure-
ly.
Agitator brushes
When to replace brushes
Disconnect cleaner from electri-
cal outlet before checking
brushes.
When brushes are worn and
bristles do not touch the edge of
a card held across the bottom
plate at the agitator opening,
they should be replaced. Always
replace both brushes at the same
time to maintain cleaning effec-
tiveness.
What brushes to buy
If your cleaner has red brushes, ask
for HOOVER part No. 46445001.
If your cleaner has black brushes,
ask for HOOVER part No. 166646.
They are designed to be used with
your cleaner.
17