GE Profile PV976 Owner's Manual And Installation Instructions page 9

POWER SUPPLY
IMPORTANT - (Please read carefullg)
&WARNING:
FOR PERSONAL SAFETY,THIS APPLIANCE MUST
BE PROPERLYGROUNDED.
Remove house fuse or open circuit breaker before
beginning installation.
Do not use an extension cord or adapter plug
with this appliance. Follow National Electrical Codes
or prevailing local codes and ordinances.
Electrical supplg
These vent hoods must be supplied with 120V,
60Hz, and connected to an individual, properlg
grounded branch circuit, and protected bg a 15
or 20 amp circuit breaker or time delag fuse.
• Wiring must be 2 wire with ground.
• If the electrical supplg does not meet the above
requirements, call a licensed electrician before
proceeding.
• Route house wiring as close to the installation
location as possible in the ceiling or wall.
See page 14 for details.
• Connect the wiring to the house wiring
in accordance with local codes.
Grounding instructions
The grounding conductor must be connected
to a ground metal, permanent wiring sgstem, or an
equipment-grounding terminal or lead on the hood.
-4,WARNING:
The improper connection
of the equipment-grounding conductor can result
in a risk of electric shock. Check with a qualified
electrician or service representative if gou are in
doubt whether the appliance is properlg grounded.
9