Troubleshooting Tips - GE Profile PV976 Owner's Manual And Installation Instructions

Before gou call for service...
Troubleshooting Tips
Save time and mone_l! Review the chart below first
and gou mag not need to call for service.
Possible Causes What To Do
The heat sensor is activated.
Fan turned on by itself
and is in iViED setting.
The fan setting can be
adjusted but not to OFF.
*This is normal when temperatures below the hood
are exceeding the heat sensor limits. Remove the heat
source under the hood or wait until the hood cools to
appropriate levels. The hood will automatically turn
itself off or return to its original setting once the heat
sensor detects the temperature has reached a safe
condition.
A collar around a push Push button meg be stuck. * Check affected push button and ensure that it is not
button is not Numinating stuck. Call for service if problem persists.
when pressed.
Two or more collars Two or more push buttons * Check affected push buttons and ensure that theg
around the push buttons mag be stuck, are not stuck. Call for service if problem persists.
are not illuminating
when pressed.
Sequential presses This is normal. It is a feature * No action required.
of the LIGHT or FAN of the hood that the LIGHT
buttons will change and FAN buttons will cgcle
the setting from lowest around through the settings
setting to OFF,to so that gou can easilg set
highest setting, to OFF, the controls to gour desired
to the lowest setting, setting.
24