Installing Windows 95 - Intergraph TD-300 Maintenance Manual

13. Select OK.
14. Exit from the Registry Editor.
15. Restart the system.
q
Update the System with the QFE Diskette.
If your system was shipped with a Quick Fix Engineering (QFE) diskette,
insert the QFE diskette into the floppy drive. Refer to the README.TXT
file on the QFE diskette for instructions on how to update the system.
q
Create an Emergency Repair Disk.
The files on the Emergency Repair Disk can restore a damaged registry to its
original contents (that is, at the time Windows NT was installed), along with
the standard Windows NT drivers.
Once you have created all of your user accounts and have finished
configuring the system, Intergraph recommends that you create an
Emergency Repair Disk using the RDISK.EXE utility. Use this utility
to update the Emergency Repair Disk any time you change your
system's configuration. You should also make and keep a backup copy
of the Emergency Repair Disk.
Refer to Windows NT Help for information on creating an Emergency
Repair Disk, and to the Windows NT Workstation Installation Guide for
information on using it.

Installing Windows 95

Complete the following checklist if you must install Windows 95 software
on your Intergraph system. Certain steps refer to system software that is
specific to your Intergraph system; instructions for installing this software
Appendix A - Installing System Software
CAUTION
111