Table of Contents
Advertisement
2
To enable PC Card hard disk operation:
1.
Start the Registry Editor (
2.
Open the following subkey in the Registry:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Pcmcia
3.
From the Edit menu, select Add Value.
4.
In the Value Name box, type InterruptMask.
5.
In the Data Type box, select REG_DWORD; then select OK.
6.
In the Data box, type F347.
7.
Under Radix, select Hex; then select OK.
8.
Exit from the Registry Editor.
9.
Restart the system.
Windows 95
CAUTION
Intergraph Computer Systems does not fully certify Windows 95 on the TD/TDZ-320, -325, -
420, or
-425, and does not ship Windows 95 installed on these systems. The following basic
information is provided as a courtesy for customers who attempt to install Windows 95 on
these systems. Intergraph Computer Systems provides no further support for such
installations, and customers assume full responsibility for supporting such installations.
Installing Windows 95 on a Deskside System
Intergraph Computer Systems has discovered a problem you may encounter if you try to install
Windows 95 on a deskside TD/TDZ-320, -325, -420, or -425. Windows 95 may not install
because of an interaction with the SCSI controller used in the deskside systems.
To work around this problem, use the basic input/output system (BIOS) Setup program to
disable external SCSI functionality before installing Windows 95. After completing
installation of Windows 95, use the BIOS Setup program to enable external SCSI
functionality.
Refer to the hardware documentation delivered with the system for information on using the
BIOS Setup program.
32.
) to open the Registry.
REGEDT
EXE
Advertisement
Table of Contents
Need help?
Do you have a question about the TD-32x and is the answer not in the manual?