GE GTS18JCPXRBB Owner's Manual And Installation Instructions page 18

Installation instructions
REVERSING THE DOOR SWING ICONT.I
®
TRANSFER FREEZER DOOR
HANDLE TO THE RIGHT (CONT.)
Stainless steel handle
(on some models):
Attach the handle to
fl_e fastener and tighten
wifl_ fl_e 3/32" Allen
wrench (supplied).
Line up d_e handle
wid_ the screw holes in
fl_e bottom of fl_e door
and tighten the screws.
!
® RE-HANG THE REFRIGERATOR
DOOR
i,ower the refligerator door onto the bottom
hinge pin.
6
Plastic
Smdghten fl_e door and line it up wid_ fl_e center
hinge bracket.
Reinstall the center hinge pin with a 3/8" socket.
Turn it tmfil it exmnds through the hinge bracket
and into the door
m
Plastic Washer-----_
HingePin---_l_l
!
i%
Center Hinge "_'_'_ i _
Bracket
Refrigerator D oor
[] RE-HANG THE FREEZER DOOR
Lower the fleezer door onto the center hinge pin.
Be sure the washer is in place.
CenterHingePin
Plastic
Lift fl_e top hinge so the pin fits into the door socket.
Support the door on the handle side and make sme
the door is suaight and the gap between the doors is
even across the flont. _,q_ile holding the door in
place, tighten the top hinge screws.
18