Charcoal Filters; Hood Lights; Hood Surfaces; Stainless Steel Surfaces - GE JV566 Owner's Manual And Installation Instructions

Careand cleaning of the venthood. gecom
The charcoal filters are cfiooed nslde
of each reusable metal grease filter
Charcoal Filters (onsome models)
NOTE" Oharcoa/ filters are not
cannot be cleaned, includedwith the hood They
They must be replaced, must be ordered from your
For30 hOodmOdels,Order[ GEsupplier
,egg ,,.,e model is ,.,,t ve,.ted
foraG hoodmode/s, Orde_ t othe,,,.side, the.i,',,'ill
Kitno. WBO2XIiOOL be redrculated through
TheSe kits canbe ordered disposable d, arcoal lilte,s
from your GEsupplier that help remoxe smoke
..................................................................................................................................................................................... and odors,
The charcoal filte_5 should
be replaced when they
are noticeably dirty or
discolored (usually after
6-12 months, depending
on hood usage).
NOTE: DO NOTrinse, or put
charcoal filters in an automatic
dlshwashe_
Painted Surfaces (onsome models)
To dean the hood sm_hce, use a hot,
damp cloth with a mild detergent
suitable tbr painted sm'fimes. Use a
clean, hot, damp cloth to remo\e soap.
D U with a dry, clean cloth.
Do not rise
steel-wool pads
or otheF
abrasive cleane_. They will scratch
the surfime, Wipe with a clean, hot,
damp cloth after using cleansers.
Stainless Steel Surfaces (on some models)
Do not use a steel wool pad; it will
scratch the surface.
To clean the stainless steel surfi_ce,
use warn/sudsy water or a stainless steel
cleaner or polish. Adwa):s wipe the
suitace in the direction of the grain.
Follow the cleaner instructions tor
cleaning the stainless steel suHi_ce.
To inquire about pro'chasing stainless
steel appliance cleaner or polish, or to
find the locadon of a dealer nearest
you, please call our toll-ti'ee number:
National Parts Center
800.626.2002
ge.com
Hood Lights
This hood requires
two 1)ulbs (not
induded), maximum 50 watts.
Pro'chase and install PAR20, 50 W
Maxim um halogen bulbs.
\._l_en replacing a bulb, let it cool fi_st.
Make sure that power m the light has
been turned
off. Never allow a hot bull)
to COil/e into contact with _;IteI:
WARNING: To r educe the r , s k o f
electric shock, do not connect electrical power
to the hood without both bulbs in place.
To chmlge the fght bulbs:
[] (;rasp
the bulb on the edges and
tmscrew it.
[] Replace
xfith the same size bull).
CAUTION:
E:,: D onot touchthehoodh)ht bulbswhenthey
are on.They maybe hotenough tocause
injury
E:,:Thehghtbulbsoperate at extremely h l)h
temperatures. If theyshatter, t hehotglass
couldcause personal i njun/
5