Charcoal Filters; Grease Filters; Hood Lights; Painted Surfaces - GE Appliances JVE40 Owner's Manual And Installation Instructions

Care and cleaning of the vent hood. GEAppliances.
The charcoal filters are clipped
inside of each reusable metal
grease filter.
Charcoal Filters
(onsomemodels)
cannot be cleaned.
They must be replaced.
Order Kit no.
WBO2X11000
Thiskit can be ordered
from your GEsupplier.
NOTE:Charcoal filters are not
included with the hood. They
must be ordered from your
GEsupplier.
If the model is not vented
to the outside, the air will
be recirculated through
disposable charcoal filters that
help remove smoke and odors.
The charcoal filters should
be replaced when they are
noticeably dirty or discolored
(usually after 6-12 months,
depending on hood usage).
NOTE:DONOTrinse, or put
charcoal filters in an automatic
dishwasher.
Note: If the hood in installed
for recirculation mode, it is
not ENERGY STAR @
certified.
Painted Surfaces
(onsome models)
To clean the hood surface, use a hot, damp
cloth with a mild detergent suitable for
painted surfaces. Use a clean, hot, damp
cloth to remove soap. Dry with a dry, clean
cloth.
Do not use steel-wool pads or other abrasive
cleaners.They will scratch the surface. Wipe
with a clean, hot, damp cloth after using
cleansers.
Stainless Steel Surfaces (on some models)
Do not use a steel wool pad; it will scratch
the surface.
To clean the stainless steel surface, use
warm sudsy water or a stainless steel
cleaner or polish. Always wipe the surface in
the direction of the grain. Follow the cleaner
instructions for cleaning the stainless steel
surface.
To inquire about purchasing stainless steel
appliance cleaner or polish, or to find the
location of a dealer nearest you, please call
our toll-free number:
National Parts Center 800.626.2002
GEAppliances.com
Hood Lights
A WARNING:
- Lamp contains Hercury. Hanage
in accord with disposal laws. Seewww.
lamprecycle.orgor 1-800-435-4448.
For installation, handling and disposal
precautions, refer to the fluorescent lamp
packaging literature.
A WARNING:
To reduce the risk of electric shock, do
not connect electricalpower to the hood
without both lamps in place.
A CAUTION:
Do not touch the hood lamps when they ore
on. Theymay be hot enough to causeinjury.
To prevent injury from broken lamps,
handle lamps carefully and do not operate
hood without lamp lens covers in place.
This hood requires two Compact Fluorescent
Lamps (CFL) with a GU24 base (included),
maximum 15 watts.
To change the lamps:
[] When installing or replacing a lamp,
make sure that power to the light has
been turned off. Never allow a lamp to
come into contact with water.
[_ Removethe lenscover by slidingit in a
horizontaldirection and pulling it down
and away from the hood.
I-_ Grasp the lamp by the plastic base
portion of the lamp and unscrew it.
[] Replacewith energysaving GE 15W
Compact Fluorescent Lamp with GU24
base GEService Part: WBO8XlO064.