GE JV566 Owner's Manual And Installation Instructions page 9

Installation Instructions
DAMAGE--SHIPMENT/INSTALLATION
• If the refit is dmnaged in shipment, return the unit to the
store in which it was bought for repair or replacement.
• If the refit is dmnaged by the customer, repair or
replacement is the responsibility of the customer:
• If the unit is damaged by the installer (if other than
the CtlStomer), repair or replacement illtlSt be made
by arrangement between customer and installe_:
MOUNTING SPACE
.....; i .....
Bottom edge of
cabinet needs
to be 30" or
__j __J more from
the cooking
surface
the hood
NOTES:
• This range hood is fin" installation oxer ranges up to
• t-) Wl(le.
• If you are going to vent your range hood to the
outside, see the "Ducting Requirements" section for
exhaust duct prepa ration.
TOOLS YOU WILL NEED
Flatbladeand Phillips Pencil
screwdrivers Ducttape
Saw (saberor keyhole) Electricdrill Metal snips
(in some
applications)
1/4" pivoting Pliers Tapemeasure Wire stripper
hex socket
Flashlight Caulking Level 1/4" Nutdriver
PARTS INCLUDED
PART QUANTITY
Metal GreaseFilters 2
Mounting Screws 4
ExhaustAdaptor/Damper 1
(for 3W' x 10" rect. venting)
ExhaustAdaptor Screws 1
ExhaustAdaptor 1
(for 7" round venting)
Damperfor 7" Round
ExhaustAdaptor (Obtain Locally)
,I
OPTIONAL ACCESSORIES
These kits can be ordered from your GEsupplier.
I
CordKit--For both 30" and 36" models,
order Kit no. JXHC1.
CharcoalFilters--JV5 Series only, if recirculating
For30" hood models, order Kit no. WBO2X11000.
For36" hood models, order Kit no. WBO2X11001.
9