Error Codes
If the dryer stops, the status lightsflash and the signal beeps, an error has occurred. Press PAUSE/CANCEL Consult the
Error Code Chart below for the possible cause and solution. Make the correction, select a cycle and press START If the
dryer stops, status lights flash again and the beeping continues, please contact service for assistance.
Possible Causes
What To Do
Lint I_ther blocked,
ventilation
• Remove
lint; wash th(' lint t_]lt'r to remove
sof_cn('r sh('(t
system dogged
or dryer
residue.
Cl<m
()lit Ihe ventilalion
svsleln. R( duc(
load
overloaded
size.
Push button held too lolg or
• Pr('ss buttons lightl 7,m_d release. I)isengagc the button.
wedged in the control panel
21