Electric Druer; Electrical Requirements - GE Spacemaker DSXH47 Owner's Manual & Installation Instructions

Installation Instructions
Read these instructions completely and carefully.
ELECTRICAL CONNECTION
INFORMATION FOR
ELECTRIC DRYERS
^_ WARNING - "r,, , -e,lu. , h,,-i¢,,_
fir_, c le,.:tric shock or p_ rsonal il!jury:
• DO NOT USE AN EXTENSION CORD _VITH
THIS APPLIANCE.
• THIS APPLIANCE MUST BE PROPERLY
GROUNDED.
Tiffs dryer mttst be electrically grounded in accordance
with local codes mad olxlinances, or in the absence of local
codes, in accordance with the NATIONAL ELECTRICAL
CODE, ANSI/NFPA NO. 70.
Electrical Requirements
• This dl_,er must be colmected to a 20SV or 24(W
indivi(h/_d brancla cir( uit, protected by .'I0-;unp circuit
breakel_ or time<telay fuses.
• Pow(r SUl)ply: 3-wire 24(,Lvoh, singlc-phase, t_)-I tz,
z_dleFll_t lillg CII IT(:111.
• I se COl}IX r conduclol.'s only.
• lithe ele(tri( supl)lx does not meel tile aboxe
sp_ cifications,
call a licensed
electrician.
NOTE: A wiring diagram is located under the top l)anel.
ELECTRICAL CONNECTION
INFORMATION FOR GAS DRYERS
_k WARNING - l_> ,-,.,1..,h, ,-isk o ,
fir<, _ leclric shock or l)ersonal injm-y:
• DO NOT USEAN EXTENSION CORD ORAN
ADAPTER PLUG WITH THIS APPLIANCE.
• DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR
REMOVE THE THIRD GROUNDING PRONG FROM
THE PO_rER CORD.
This dryer must be electrically grounded in accolxtance
Mth local codes mid olxtinances, or hi the absence of local
codes, in accordance with the NATIONAL ELECTRICAL
CODE, ANSI/NFPA NO. 70.
Electrical Requirements
• This cider must be supplied with 120x,, 60-tlz,
and comlecled to a properl 3 grounded branch
circuit, protected I)y a 15- or 20-mnp circuit breaker
or lime-delay fuse.
• lithe el(ctric supply provided does not meet the
above specifications, it is recommended thai a licensed
<leclrician inslall an approved outlet.
_[nsure properground
exists before u se
External Ground (if required)
An extertml _ound wire (not provided), which meets local
codes, may be added by attaclfing it to the _en _otmd
screw on the rear of the dryer in the upper left corner
above the cord, mid to gTounded metal cold water pipe
or other estabh'shed grotmd.
Attach groundwire
(obtain locally}
L"
NOTE: A wiring diagram is locat{ d under 1he top panel.
11