Advertisement
Monogram.
™
ZIC360NM – GE Monogram 36" Built-In Bottom Freezer Refrigerator with
Automatic Icemaker
1/4" FRAMED PANEL DIMENSIONS
If you choose to install framed panels, they must be cut to
the dimensions shown. The panels will slide into the frame
on the door, drawer and grille.
If the custom panel is less than 1/4" thick and if it fits loosely
in the door frame, it can be backed up with a piece of filler
material or foam tape to improve the fit.
IMPORTANT NOTE: Maximum weight for fresh food panel is
50 pounds and 30 pounds for freezer drawer panel.
A
Grille Panel
B
Fresh Food
C
Panel
Freezer Drawer
D
Panel
3/4" OVERLAY PANEL DIMENSIONS
For a more custom appearance, overlay panels may be
installed on trimmed models. The overlay panel must be
secured to a 1/4" thick backer panel which slides into the
trim. A spacer panel 0.10" thick must be placed between the
overlay and backer panel.
IMPORTANT NOTE: Maximum total weight for assembled
fresh food panel is 50 pounds and 30 pounds for freezer
drawer panel.
Assemble the panels with glue and screws.
• Center the spacer panel on the backer panel, left to right
and top to bottom. Secure the panels with glue.
• Center the spacer and backer panel on the overlay panel
and secure with glue and screws. Screws must be
countersunk into the backer panel.
Specification Revised 8/02
Framed Panel Dimensions
A (Width)
1/4" Framed Panel
33-7/8"
Overlay Panel Dimensions
A (Width)
1/4" Backer Panel
33-7/8"
0.10" Spacer Panel
32-1/2"
3/4" Overlay Panel
34-1/8"
Door/Drawer
B (Grille Height)
8-7/8"
B (Grille Height)
8-7/8"
7-5/8"
9"
Door/Drawer
Overlay
Panel
1/4"
.10"
Backer
Spacer
Panel
For answers to your Monogram,
GE appliance questions, visit our website at
GEAppliances.com or call
GE Answer Center
®
service, 800.626.2000.
5/16"
Trim
Reveal
1/4"
Panel
C (FF Height)
D (FZ Height)
46-1/16"
21-7/8"
C (FF Height)
D (FZ Height)
46-1/16"
21-7/8"
44-11/16"
20-1/2"
46-5/16"
22"
Overlay Panel
Spacer Panel
Backer Panel
Note: Left-to-right offset is not always
equal to top-to-bottom offset.
®
GE Profile
™
or
R
Listed by
Underwriters
Laboratories
Advertisement
