Zoom MultiStomp MS-50G Operation Manual page 9

4
To change the page
Press
The next page opens.
Effect processing limit
T h e a l l o w s y o u t o
c o m b i n e 6 e ffe c t s a s yo u l i ke .
However, if you combine effect
types that require great amounts of
processing power (amp models, for
example), the available processing
capacity might not be enough. If the processing required for an
effect exceeds the available capacity, the effect is bypassed and
a "DSP Full!" message appears. This can be avoided by changing
1 or more of the effect types or setting them to THRU.
NOTE
processing power whether it is ON or OFF.
HINT
at least 1 second to immediately set an effect
to THRU.
9
Adjusting Effects