Changing Patch Memories With The Footswitch - Zoom MultiStomp MS-50G Operation Manual

Confirm that the Home Screen is shown.
To add or remove patch memories to a
1
list that the footswitch cycles through
1. Open the MEMORY list.
Press
Select a patch memory to add to or remove from
2.
the footswitch (A/B) list.
Turn
3. Add or remove it.
Press
HINT
memories from the footswitch list.
To cycle through patch memories in
2
the list in order using the footswitch
1. Open the MEMORY list.
Press
2. Change the patch memory.
Press
HINT
In the example on the right,
pressing the footswitch cycles
through the patch memories in
alphabetical order like this.
[04:Flanger]
[01:160Comp]
[02:RackCmp]
[04:Flanger]
[01:160Comp] ...

Changing Patch Memories with the Footswitch

11